Test our shredders with your material

Test our shredders with your material!

We’re very pleased to announce our XR and ZR class shredders. Contact us today to arrange a demonstration.

On the safe side

Any investment in a new shredding solution needs to be well thought out. Above all, you need to know for sure that the machine will shred the material at the desired throughput rate and at the appropriate quality. UNTHA on-site demonstrations ensure that this is the case, prove this point, and more. We visit companies and provide on-site test runs, giving our customers and potential new customers the opportunity to put UNTHA’s shredding solutions through their paces. Depending on your requirements, we’ll provide the optimum shredder with the right cutting system.

See our machines here See our procedure here Meet your contact partner here

You can test the following materials, among others:

Industrial and commercial waste
Waste wood
Metal
Pulper ropes
Roll goods
Mattresses
Carpets
Mixed construction waste
Railway sleepers
Tyres
and much more

XR class: The advantages of the single-shaft shredder at a glance

The XR class is particularly suited to processing different materials to a defined particle size (25 mm – 300 mm). This process can be single-stage and multi-stage.

The robust design of our machines enables them to be used in tough conditions as well as for shredding particularly difficult materials.

The efficient UNTHA Eco Power Drive with water-cooled synchronous motor saves up to 75% in energy costs with higher performance compared to diesel-powered shredders.

Depending on the place and purpose of use, our shredders are available as stationary and mobile variants. Thanks to the crawler track and radio remote control, the XR mobil-e can be manoeuvred comfortably to the designated space and connected safely to the power supply with the practical quick-release power plug.

ZR class: The advantages of the 2-shaft shredder at a glance

The ZR class is particularly suitable for volume reduction and coarse pre-shredding of difficult-to-shred waste and recyclables to 90% < 300 mm.

The most economical 2-shaft shredder with the lowest Life Cycle Costing (LCC) in its class: The energy-efficient electric drive with water-cooled synchronous motor is ultra energy efficient and consumes up to 75% less energy than a conventional diesel-hydraulic drive.

The shredders of the ZR class stand for high throughput rates, and are used for voluminous and difficult-to-shred waste and recyclables.

Thanks to the special quick-change table system, the cutting systems can be replaced in no time at all. Among other things, this guarantees that the machine has a high level of availability. The cutting chamber is easily accessible and thus can be cleaned easily and quickly.

From demonstrations to purchasing

During a one-week test run at our company, we were able to get a comprehensive picture of the performance of the UNTHA XR3000C. We were able to test the shredder ourselves and received intensive support from UNTHA. After that, the decision was very easy for us.

Clemens Karletshofer

Managing Director

How to arrange your demonstration

Arrange an overview

Your location: Do you have an outdoor facility or a hall? Do you have any power connections? The type of materials that you operate with: What are they exactly? How do you intend to feed the shredder?

We’ll find the right solution for you

Before the test run, you’ll be informed about the conditions and procedure. Afterwards, our team prepares real and practical solutions for all possible future tasks. The most suitable machine is selected according to the specifications and requirements.

Let’s go

Our machines prove what they can do throughout tests lasting several days. During commissioning and throughout the test run itself, a UNTHA technician will always be available to offer advice and assistance.

Arrange a demonstration appointment now

Please tell us something about the material to be tested and, of course, about yourself and your company. We will contact you as soon as possible, and coordinate all further steps with you.

Hannes Kratzwald

Team Leader Application Engineering XR/ZR & Demonstrations

Your contact partner

Quick and uncomplicated route to your demonstration appointment.

Fill in form

What should be shredded?

Application*

Informations about your material and the planned application*

How can we reach you?

First name*

Last name*

Company*

E-Mail address*

Phone number*

Website (Company)

What is your address?

Street*

House number*

ZIP code*

City*

Country*

To protect our forms from abuse, we use the service Google reCAPTCHA. You hereby agree
that reCAPTCHA collects your personal data to ensure the security of the website. Please note our privacy policy. If you do not want your data to be transferred to Google, please send us an email at info@untha.com to contact us.

After sending the form, the above data will be processed for the purpose of handling your request. Should it be necessary, we reserve the right to forward your data to our sales subsidiaries or authorised sales partners for the sole purpose of processing your inquiry.