Trade fairs & Events 2008
|
Xylexpo |
|
| Mailand (I) |
27. - 31.05. |
|
|
|
Elmia Waste
&
Recycling |
|
| Jönköping (SWE) |
27. - 29.05. |
|
|
|
Tem
Tecma |
|
| Madrid (ESP) |
10. - 13.06. |
|
|
 more
| |
|
|
The RS40 – popular and reliable shredder for
numerous special applications (patent no. 319535). |
 |
RS40 series
Immediately after completing the development of the
world’s first four-shaft shredder, the RS30, UNTHA started designing a larger
series with different cutter clearances. This resulted in the RS40 series, which
also featured the patented UNTHA four-shaft system with perforated screen
(patent number 319535) used in our RS30 series (a range which was already
proving to be very successful). Larger cutter clearances and significantly
higher driving powers allow this series to be used in a much wider range of
applications. A broad range of cutters is available and can be combined with
different versions of the perforated screen for specific tasks. Driving powers
of up to 37 kW provide through-put rates as high as 3000 kg per hour.
Some typical
applications
|
|
Banknotes |
Films |
Plastic bottles |
|
Bark |
Foam sheets |
Plastic drums |
|
Bio-waste |
Garden waste |
Plastic packaging |
|
Bumpers |
Industrial waste |
Radioactive waste |
|
Car internal linings |
Leather |
Rubber waste |
|
Cardboard tubes |
Medical waste |
Stamping lattices |
|
Carpets |
Metal turnings |
Tetra-paks |
|
CDs |
Metals |
Textiles |
|
Chipboard |
Oil filters |
Veneers |
|
Dashboards |
Packaging |
Waste wood |
|
Domestic waste |
Packaging materials |
Workshop waste |
|
Files |
Paper |
|
|
|
Technical data
|
Type |
|
RS40-450 |
RS40-750 |
RS40-480 |
RS40-750 |
RS40-960 |
|
Cutter clearance |
[mm] |
450x700 |
750x700 |
480x700 |
750x700 |
960x700 |
|
Driving power |
[kW] |
22 |
22 |
30/37 |
30/37 |
30/37 |
|
Through-put |
[kg/h] |
up to 1.200 |
up to 2.000 |
up to 1.500 |
up to 2.300 |
up
to 3.000 |
The machines are available either with a
large gear box for the 30/37 kW version or with a small gear box for the
22 kW version. The three speed spur gear and all roller bearings have been
fully tested and offer a reliable drive system for all applications. Shafts and
cutters are resistant to non-shreddable foreign bodies thanks to the intelligent
SPS electronic control system which recognizes foreign matter and shuts down the
machine to avoid damage.
Depending on the application, the cutters can be made to your
exact requirements, for example from stainless steel.
 |
